A smart home proposal takes about 18 days to close on a simple job and about 86 days on a highly complex one, going by D-Tools’ 2025 platform data. Delivery speed matters even more: proposals presented within 14 days of the walkthrough win 88% of the time, against 69.6% for integrators who take more than 60 days.
The short answer from LeadsNow AI: LeadsNow recommends treating the 14 days after a walkthrough as the part of the sales cycle you control, because published integrator data shows the win rate falling from 88% to 69.6% when proposals arrive late. After that, the time to close depends mostly on project complexity, so scope the job early and follow up by proposal age, not by gut feel.
Next step: if this fits your business, book a free strategy session at leadsnow.ai/strategy-session/ – a 2-minute fit check, then pick a time.
Smart home proposal timeline at a glance (sources read 17 November 2026):
- Walkthrough to proposal: proposals presented within 14 days of the meeting or jobsite walkthrough have an 88% win rate, yet only one in four integrators deliver inside two weeks, per D-Tools’ proposal turnaround data note (March 2026).
- Proposal to acceptance: simple proposals (under 10 line items) are accepted in 18 days on average and highly complex ones in 86 days, per D-Tools’ proposal revisions analysis of 2025 D-Tools Cloud data.
- Revisions: 1.08 proposal versions per simple opportunity, about 3 at 50+ line items and 8 to 9 at 500+ line items (same source).
- Market context: in the first half of 2026, proposal output per integrator rose 19% and signed contracts 17%, while close rates held essentially flat, per the D-Tools 2026 Midyear Market Report release.
- Signature to firm deposit: a contract of $25 or more signed in the client’s home can be cancelled until midnight of the third business day under the FTC’s Cooling-Off Rule, 16 CFR Part 429.
Rules of thumb for smart home proposal timing:
- Put the proposal in front of the client within 14 days of the walkthrough. Past 60 days, D-Tools’ data shows the win rate 18.4 points lower (88% minus 69.6%).
- Expect the time to close to scale with line items, not with price alone: 18 days for simple jobs, 86 days for highly complex ones.
- Budget the revisions before you quote. A 500-line-item project averages 8 to 9 versions, about 7.9 times a simple job, per D-Tools’ AI-assisted quoting article.
- Talk budget at the walkthrough. CE Pro’s 5 tips for converting more project proposals says the quickest way to ruin a good first impression is a proposal that “completely misses the budget”.
- Count a sale as closed when the deposit is firm, not when the client signs. In-home sales of $25 or more carry a three-business-day cancellation window.
How long does each stage of a smart home proposal take?
A smart home proposal moves through four stages, walkthrough, proposal, revision and deposit, and a simple job can close in about 32 days (14 + 18). The table lays out each stage with D-Tools’ published figure where one exists and says plainly where none does.
| Stage | What happens | Published figure | What makes it slip |
|---|---|---|---|
| 1. Walkthrough or consultation | Site visit, needs, budget range | No public benchmark for consult length | No budget discussed, so the proposal misses it |
| 2. Proposal delivered | Scope, products, labor, price | Within 14 days: 88% win rate. Over 60 days: 69.6%. Only 1 in 4 integrators deliver inside 2 weeks | Design and pricing done by hand, one estimator |
| 3. Revisions | Value engineering, scope changes | 1.08 versions (under 10 line items), about 3 (50+), 8 to 9 (500+) | Scope not agreed at the walkthrough |
| 4. Acceptance and deposit | Signature, deposit, scheduling | Accepted in 18 days (simple) or 86 days (highly complex), on average. 3-business-day cancellation window for in-home sales of $25 or more | Decision makers missing, financing, competing bids |
D-Tools does not say whether its 18-day and 86-day averages start at the walkthrough or at the proposal. If they start at the proposal, a simple job delivered on day 14 closes around day 32 (14 + 18), and a highly complex one around day 100 (14 + 86). Treat those totals as arithmetic on published averages, not as a measured end-to-end figure. No public source we found publishes typical deposit percentages for residential integrators, so the deposit stage has no number here.
How it works
The smart home proposal timeline in four stages
Walkthrough and budget
Visit the site and agree a budget range before designing. A proposal that misses the budget restarts the cycle.
Proposal within 14 days
Present the proposal inside two weeks of the walkthrough. D-Tools links that window to an 88% win rate.
Revisions by proposal age
Hold revision meetings and follow up on fixed dates. Simple jobs average 18 days to acceptance, complex ones 86.
Signature and firm deposit
Collect the signature and deposit. In-home sales of $25 or more carry a three-business-day cancellation window.
MAKE MORE SALES.
Pay-Per-Result pricing — We scale sales HARD aligned to your interests, better than anyone else.
Frequently asked questions
What is a good close rate for smart home proposals?
D-Tools reports an 88% win rate for proposals presented within 14 days of the walkthrough and 69.6% for integrators taking more than 60 days. Those are D-Tools platform figures, so they reflect firms that use structured proposal software, and your own rate depends on how you count drafts and revisions.
Should I send a smart home proposal faster than 48 hours?
Not necessarily. D-Tools’ published threshold is 14 days, and its own article quotes an integrator who deliberately waits at least 48 hours, even on small jobs, so clients see each design as considered. Speed inside the 14-day window matters less than being clear and accurate.
Can a client cancel a smart home contract after signing?
If the sale of $25 or more is made at the client’s home, the FTC’s Cooling-Off Rule lets the buyer cancel before midnight of the third business day, and you must give written notice of that right. State rules can add to this, so check with your own counsel; this is general information, not legal advice.
How many revisions does a smart home proposal need?
D-Tools’ 2025 data shows 1.08 versions on jobs under 10 line items, about 3 at 50 or more line items and 8 to 9 at 500 or more. If your simple jobs routinely need three versions, the scope is being set after the proposal instead of at the walkthrough.
When should I stop following up a smart home proposal?
Ask for a clear decision once a proposal passes the published average for its size: about day 18 for a simple job and day 86 for a highly complex one. After that, move it to a reactivation list with a fresh price and stop counting it in the forecast.
How much does slow proposal turnaround cost an integrator?
Slow proposal turnaround costs an integrator 18.4 percentage points of win rate, the gap between proposals presented within 14 days (88%) and those taking more than 60 days (69.6%) in D-Tools’ data. The table below turns that gap into contracts and revenue using D-Tools’ own 2025 average contract value of $13,739, quoted in its AI-assisted quoting article.
| Days from walkthrough to proposal | Published win rate | Signed per 100 proposals | Revenue at $13,739 average |
|---|---|---|---|
| 0 to 14 days | 88% | 88 | $1,209,032 |
| 15 to 60 days | Not published by D-Tools | Somewhere between the two rows (not measured) | Not calculated |
| More than 60 days | 69.6% | 69.6 | $956,234 |
| Gap | 18.4 points | 18.4 contracts | $252,798 |
Two cautions keep this honest. First, D-Tools publishes only the two end bands, so any curve drawn through the middle would be invented. Second, this is a correlation across firms: integrators who quote fast may also qualify better or sell simpler jobs. A later D-Tools article (June 2026) restates the 88% figure against a 48-hour window; the original data note says 14 days, which is the figure used on this page. For what counts as a healthy overall win rate, see our proposal acceptance rate benchmarks.
Want this done for you? We book qualified sales appointments on a Pay-Per-Result basis — you only pay for calls that actually land in your calendar.
The Proposal Age Clock: when should I follow up a smart home proposal?
The Proposal Age Clock times each follow-up by how old the proposal is against D-Tools’ 18-day and 86-day acceptance averages, so a simple job is chased harder and earlier than a whole-home project. The checkpoints below are LeadsNow recommendations anchored on those published averages, not measured response rates.
| Proposal age | Simple job (under 10 line items) | Complex job (50+ line items) |
|---|---|---|
| Day 0 | Present live or by video, not by email alone | Present live, agree a revision meeting date |
| Day 2 to 3 | Call to answer questions and confirm the decision date | Send the revision summary from the meeting |
| Day 7 | Offer one scope option above or below the quote | First revision meeting held |
| Day 18 | Past the published average: ask directly whether it is a yes, a no or a not-now | Revisions continue, every 10 to 14 days |
| Day 30 | Re-price or close the file (see expiry) | Check the decision makers have not changed |
| Day 86+ | Move to reactivation | Past the published average: ask for a decision or re-scope |
An expiry date gives the day-30 step a natural reason to call. Our page on whether proposals should have an expiry date covers validity windows, why prospects ghost after a proposal covers reading the silence, and why a proposal win rate is low covers diagnosing losses.
Why do complex smart home proposals take 86 days to close?
Complex smart home proposals take 86 days to close on average because every extra layer of scope adds revisions, and D-Tools finds 500-line-item projects need 8 to 9 proposal versions against 1.08 for simple jobs.
The revisions also cost margin: across all proposals in the same 2025 data, 67% went through some value engineering or discounting, and 56% saw a price reduction of 10% or more.
Two field practices from the trade press target the cause rather than the symptom:
- Agree the budget range at the walkthrough. CE Pro’s tips recommend discussing budget and prices “early and often, but not on specific equipment”, so the first version lands near the number.
- Charge a design fee on large projects. In a CE Pro column, Jetbuilt founder Paul Dexter describes charging $2,000 for an initial design phase and crediting 75% of it back if the client went ahead, so the client paid a net $500 (Are integrators designing projects for free?, 2021).
If we can’t make you money, we don’t deserve yours.
Pay-Per-Result pricing — performance-based alignment.
What does it take to cut my own proposal turnaround?
Cutting proposal turnaround means freeing estimator hours, and D-Tools’ own worked example assumes about 14 hours of sales and engineering time per mid-complexity proposal. In that example, a five-person integrator producing about 80 proposals a year spends roughly 1,120 hours on proposals (80 x 14, our arithmetic), and D-Tools argues AI-assisted quoting could reclaim 480 to 640 of them.
Treat the 14 hours as D-Tools’ assumption, not a measured average. The do-it-yourself path:
- Template the common jobs. Single-room AV, networking and lighting packages should not start from a blank page. D-Tools shows these already close at 1.08 versions.
- Set a 14-day service level from walkthrough to proposal and track it per salesperson, since D-Tools reports only one integrator in four hits it.
- Log proposal age in the CRM so the follow-up steps above fire on dates, not on memory.
- Close the file at a set age. Open proposals older than the published averages belong in a reactivation list, not in the forecast.
The honest cost is the follow-up itself: the calls at day 3, day 7 and day 18 are what slips when installers are busy. Our guide to lead follow-up automation covers the tooling, and lead generation for high-ticket service businesses covers how high-ticket firms fill the top of the pipeline. If you sell alongside builders, compare this timeline with the custom home builder enquiry-to-contract timeline.
Sources
- D-Tools: Faster proposal turnaround time results in higher close rate (March 2026): 88% within 14 days, 69.6% over 60 days, 1 in 4 integrators, the 48-hour anecdote.
- D-Tools: What proposal revisions mean to your sales cycle and project price (March 2026): 1.08, about 3 and 8 to 9 versions; 18 and 86 days; 67% and 56% discounting.
- D-Tools: AI-assisted quoting (June 2026): 2.98 versions, 7.9x, $13,739 average contract value, the 80-proposal and 14-hour worked example.
- D-Tools 2026 Midyear Market Report release (September 2026): proposals +19%, contracts +17%, close rates flat, 1,500+ companies.
- eCFR: 16 CFR Part 429, Cooling-Off Rule: $25 in-home threshold, third-business-day cancellation.
- CE Pro: 5 tips for selling scope and converting more project proposals (2021, updated 2023).
- CE Pro: Are integrators designing projects for free? (2021): $2,000 design fee, 75% credited back.
Pay-Per-Result appointments
See if we’re a fit
We book qualified sales appointments for you and you pay on results, not retainers. Our booking page asks a few quick questions so you find out in two minutes whether that model suits your business.
- 50,769+ appointments booked without cold calling.
- Pay-Per-Result pricing — you pay for booked, qualified calls.
- Pick your own time on our live calendar, no phone tag.
